Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Tampa?
Panel replacement in Tampa typically costs between $250 and $500 for a single damaged section, with most homeowners paying around $350 for one panel including hardware and labor. That price covers removing the bent or rusted section, matching the profile and color, and resetting the hinges so the door runs true again. If two or more panels are damaged, or the door is an older model with a discontinued style, expect the number to climb toward the top of that range or slightly above it.
We’re Fieldstone Garage Door Repair, and panel replacement is one of the jobs we do most often around Hillsborough County. Below we’ve laid out what the work actually runs line by line, what moves the price in Tampa specifically, and how to keep the bill down without cutting corners on a door that has to open and close every day.
Key Takeaways
- One panel replacement in Tampa runs $250 – $500, averaging about $350 installed.
- Sectional doors (Clopay, Amarr, Wayne Dalton) are the easiest to re-panel because sections are replaceable individually.
- Tampa’s salt air and summer humidity are the two biggest reasons panels rust and need replacing here versus drier climates.
- Replacing a panel is almost always cheaper than a full door ($700 – $2,200), unless the door is structurally bent.
- We work on Clopay, Amarr, Wayne Dalton, Raynor, and most other panel systems, so color and profile matching isn’t a guessing game.
Panel Replacement Cost Breakdown (2026)
Here’s what the individual pieces of a panel replacement tend to run in the Tampa market. These are installed prices – labor, hardware, and haul-away of the old section included.
| Scope of Work | Typical Cost |
|---|---|
| Single steel panel (bottom section, most common) | $250 – $400 |
| Single panel, insulated or designer profile | $320 – $500 |
| Two-panel replacement | $450 – $750 |
| Panel replacement with hinge and roller refresh | Add $60 – $150 |
| Color-match for discontinued panel styles | Add $40 – $120 |
| Full door replacement (if panels aren’t salvageable) | $700 – $2,200 |
A single damaged bottom panel is the most common call we get, and it lands squarely in the $250 – $500 band. That bottom section takes the beating – lawn mowers, kids’ bikes, backing into it in the driveway, and the splash zone from rain running off the roofline. What pushes a job up is the number of panels, whether the profile is still in production, and whether the damage bent the track along with the panel. The door section is only half the picture: an opener or track problem can mimic panel damage, which is why we look at the whole system before quoting a number. If we find the door needs more than panels, our garage door repair service covers the rest of the system, including opener repair ($120 – $320) and track realignment ($120 – $240).
What Affects Panel Replacement Pricing in Tampa
The $250 – $500 range is what we see most weeks. What moves you toward one end of it or the other:
- Panel material and insulation. A basic single-layer steel panel sits at the low end. An insulated or double-layer panel – common on newer builds in neighborhoods like Westchase and New Tampa – costs more because the section itself costs more to source.
- Whether the style is still made. Tampa has a lot of homes built in the 1980s and 1990s, and some of those doors use panel profiles that are out of production. Clopay and Amarr keep a longer back catalog than most, which helps, but a discontinued style can add $40 – $120 for a matching section or a custom fabricate.
- Salt air and rust. This is the Tampa factor most people don’t think about. Homes within a few miles of the bay – South Tampa, Davis Islands, Apollo Beach – see the bottom panels rust through years before an inland door in Brandon or Valrico would. That rust is often what triggers the replacement in the first place, and heavily rusted hinges and rollers usually come with it.
- Hurricane-rated sections. Plenty of Tampa doors are rated for wind load, and replacing a panel on a rated door means matching the same rated section. That’s not optional; a mismatched panel can compromise the wind rating. Rated sections cost more than a standard panel.
- Number of panels and labor time. One panel is a short job. Three or four panels, especially across a wide double-car door, add labor hours and hardware.
- Whether the track was bent too. If the same impact that dented the panel also knocked the track out of line, you’re looking at a panel replacement plus track work ($120 – $240). We check that before we quote so there’s no surprise on the day of the job.
For a closer look at how these jobs are handled south of the bay, see our page on panel replacement in Largo.
How to Save on Panel Replacement
Panels are one of the few garage door parts where you can genuinely trim the bill without cutting quality:
- Replace the panel before rust spreads. A single rusted bottom panel costs $250 – $400 to swap. Let it rust through the frame and take the hinge and track with it and you’re now into repair territory that runs much higher. Catching it early is the single biggest saver.
- Repair a panel instead of replacing it when you can. A minor dent or a bent section can sometimes be straightened and re-secured for less than the cost of a new panel. We’ll tell you honestly whether a repair will hold or whether the section needs to go – the recommendation follows what the door actually needs, not the other way around.
- Ask about color-match vs. exact-match. If the exact discontinued color is unavailable, a close-match profile saves money and is often indistinguishable from the driveway.
- Bundle small items into one visit. If your rollers ($110 – $220) or hinges are shot, having them done at the same time as the panel means one trip and one labor charge instead of two.
- Get a free estimate before you commit. Our estimates are free, and we’ll walk you through the line items so you know exactly what you’re paying for. Call (855) 360-5925 to schedule one.
One safety note worth stating plainly: we don’t recommend homeowners try to remove or install a garage door panel themselves. The panel weighs 30 to 50 pounds, the torsion spring above it holds serious stored tension, and an improperly released spring can cause severe injury. Panel work involves the spring system, and that’s a job for a trained technician. We’ll handle it.
Can You Replace Just One Panel, or Does the Whole Door Need to Go?
Yes – in most cases you can replace just the damaged panel and keep the rest of the door. Sectional garage doors are built so each section can be swapped independently, which is why panel replacement costs $250 – $500 instead of the $700 – $2,200 a full new door runs. The door only needs full replacement when the structure itself is compromised: a bent track that can’t be straightened, a bowed bottom rail, water damage through the frame, or panels so out of production that nothing will match. We diagnose that before quoting, so you’re not sold a new door when a panel will do.
How Long Does Panel Replacement Take?
A single panel replacement in Tampa usually takes one to two hours. Two or more panels, or a job that includes hinge and roller work, typically runs half a day. Because the work is contained, it’s often something we can schedule within a day or two of your call – we don’t need a full-day window like a door installation does. Call (855) 360-5925 and we’ll give you a realistic time slot rather than a vague “sometime this week.”
Why Does My Tampa Panel Need Replacing in the First Place?
Tampa sees three types of panel damage more than just about anywhere. The first is rust from salt air and humidity, especially on bottom panels near the coast – Davis Islands, South Tampa, and Apollo Beach homes wear out their lower sections faster than inland homes in Carrollwood or Temple Terrace. The second is impact: lawn equipment, a backed-in car, or a bicycle striking the bottom panel. The third is storm damage – not usually catastrophic wind, but debris and flying objects during Tampa’s summer storm season that dent or crack a section. Knowing which cause you’re dealing with tells us whether a repair, a panel swap, or a broader fix is the right call.
Panel Replacement or Full Door Replacement: Which Is Cheaper?
Replacing the panel is almost always cheaper – $250 – $500 versus $700 – $2,200 for a new door – and it’s the right choice when only one or two sections are damaged and the rest of the door is sound. Go with a full door when the damage is structural (bent track, warped frame, failed bottom rail) or when the door is at the end of its life and every panel is showing the same wear. We treat your garage door as an integrated system – door, track, and opener – and we’ll tell you which route saves you money in the long run, not just on this invoice.
Do You Work on My Brand of Door?
Almost certainly. We service eight of the most widely installed garage door and opener brands: Clopay, Amarr, Wayne Dalton, Raynor, LiftMaster, Chamberlain, Genie, and Craftsman. Because we work across brands rather than pushing one product line, our recommendations on your panel come down to what the door actually needs. For homeowners in Tampa with a Clopay or Amarr sectional door – two of the most common here – panel matching is straightforward because those profiles and colors are still easy to source. If yours is a Wayne Dalton or Raynor, we know the quirks of those systems and can usually match or repair without a full replacement.
FAQs – Panel Replacement Cost
How much does it cost to replace a garage door panel in Tampa?
Panel replacement in Tampa runs $250 – $500 for a single panel installed, with an average around $350. Insulated or designer panels sit at the top of that range, and two-panel jobs run $450 – $750. Call (855) 360-5925 for an exact quote – estimates are free.
Can I replace just one garage door panel?
Yes. Sectional garage doors are designed so one section can be replaced independently, and that’s usually the cheapest fix – $250 – $500 versus $700 – $2,200 for a whole new door. It only becomes a full-replacement job if the track or frame is structurally bent. Call (855) 360-5925 and we’ll diagnose it before quoting.
Why are Tampa garage door panels so prone to rust?
Salt air and year-round humidity, mainly. Homes within a few miles of the bay – South Tampa, Davis Islands, Apollo Beach – rust their bottom panels years before inland homes in Brandon or Valrico do. Replacing a rusted bottom panel early ($250 – $400) prevents the rust from spreading into the hinges and track. Call (855) 360-5925 to get one quoted.
Is it cheaper to replace a panel or the whole door?
Replacing the panel is cheaper in almost every case – $250 – $500 versus $700 – $2,200 for a new door. Go with a full door only when the damage is structural or the door is at the end of its life. Call (855) 360-5925 and we’ll tell you which one your door actually needs.
How long does a panel replacement take in Tampa?
A single panel takes one to two hours; a multi-panel job runs about half a day. It’s usually scheduled within a day or two. Call (855) 360-5925 for a realistic time slot and a free estimate.
What a Panel Replacement Actually Looks Like
When you call Fieldstone, the visit starts with a full look at the door – not just the visibly damaged panel. We check the track for bends, the rollers and hinges for wear, the spring system for any sign of fatigue, and the opener to rule out a drive problem that’s being mistaken for a panel issue. From there the fix is usually contained: remove the damaged section, install the matched panel, realign the hinges, and run the door through a full open-and-close cycle a few times to confirm it tracks straight and seats flush. If we find something else on the way, we show you before we touch it.
That’s the approach behind what we call the Fieldstone standard: the right fix the first time, done with the care of a trade that takes the work seriously. From a dented bottom panel to a stuck spring, we handle repair, opener repair, and full installation under one company, so you’re never stuck sourcing a second contractor when your needs change. Built to last – that’s the standard we hold ourselves to.
Get a Free Panel Replacement Estimate in Tampa
If your garage door has a bent, rusted, or dented panel, call Fieldstone Garage Door Repair at (855) 360-5925 for a free estimate. We work on Clopay, Amarr, Wayne Dalton, Raynor, LiftMaster, Chamberlain, Genie, Craftsman, and most other systems across Tampa and the surrounding area. Whether it’s one panel today or a full replacement down the road, we’ll give you a straight answer and a fair number – no upsell, no vague promises.
Pricing reflects the Tampa market as of 2026. Fieldstone Garage Door Repair offers free estimates – call (855) 360-5925.
What Our Customers Say
"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
— Stephanie Doyle"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
— Eduardo Herrera"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
— Rachel Rhodes